.jpg)
GN2336 is a high-performance dual-frequency GNSS positioning module, which is based on the state of art CYNOSURE III architecture. It supports GPS, BeiDou, GLONASS, Galileo, IRNSS, and QZSS.GN2336
GN2336 is a high-performance dual-frequency GNSS positioning module, which is based on the state of art CYNOSURE III architecture. It supports GPS, BeiDou, GLONASS, Galileo, IRNSS, and QZSS.GN2336 integrates efficient power management architecture, while providing high precision, high sensitivity and low power consumption GNSS solutions which make it suitable for automotive navigation, fleet management, navigation applications on consumer electronics.
Highlights
Supports all civil GNSS systems
Supports BDS-3 signal
Concurrent reception of L1 and L5 band signals
Smart jammer detection and suppression
Sub-meter position accuracy
Superior in multi-path mitigation and lower noise in city valley
TOPGNSS GNSS Module GN2336 Performance | |
GNSS CHIP | TAU1201 |
frequency | L1, 1575.42MHz |
protocol | NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS, EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode |
Available baud rate | (Default 115200) Can be set bps |
Receiving channel | 40 |
Sensitivity | Tracking sensitivity:-168Dbm Capture sensitivity:-157dBm |
Cold start | 29s average |
Warm start time | 28s average |
Hot start time | 1s average |
Precision | HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average |
maximum height | 18000 Meter |
Maximum speed | 515 m/s |
Update frequency | 1-10Hz(default1HZ |
Working output level | |
output level | Output TTL level+USB |
Physical characteristics | |
PIN | 5 pin 2.54.pitch |
Dimensions | 36mm * 23 mm * 10.2mm |
Operating Voltage | 5.0VDC ±5% |
weight | 6.0g |
Connector form | 2.54 5 PIN |
Operating temperature | -40 to 85 |
Storage temperature | -40 to 85 |
NMEA | Description | ||
VCC |
| ||
GND | GND | ||
TXDA | UART/TTL | ||
RXDA | UART/TTL | ||
PPS | Time standard pulse output |
Test design tool download:
https://www.topgnss.com/upload/file/202107/Satrack_client_V1.29.157.zip
The new firmware supports 5HZ refresh rate setting and saving.
For specific upgrade steps, please refer to the picture operation.
The new firmware supports 5HZ refresh rate setting and saving.
For specific upgrade steps, please refer to the picture operation.
New firmware upgrade and settings save 5HZ output steps：
